Shanghai schiak testing machinery Corp., Ltd.
Email: 66630177@163.com
Mobile: +86 195 2621 8985
Fax: +86 021-3102 9308
Address: No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai
Scope of automation:
Automatic measuring cycle (with special driving controller)
Control signal input
Two-machine interaction operation, and calibrate respectively
Single or double linkage measuring machine
28 stalls range automatic switching according to different unbalance, which can also calculated effective quality correction automatically.
Measuring time is optimized by setting tolerance and the greatest sensitivity
With positioning device M466 linkage (manual)
Provide remote control function, which will connect the main computer Interface, and can communicate with PC
Technical parameters
Range of balancing speed : 180~5000 r/min
Standard instruction reading in the range of a word
Technical specifications such as machinery, the value of this measure applies to speed range : 820 to 5000 r/min
When the speed range is 180~389 r/min, unbalance can be expanded 100times
When the speed range is 390~819 r/min, unbalance can be expanded 10times
Sensitivity remain unchanged when the speed within the apparatus
Min. achievable residual unbalance: consistent with the parameters of technical specifications, but not quite superior to the standard shown that the extension of multiples unbalance
Overall imbalance measuring range:about 1:500000
Average measuring time: about 3 seconds(not including acceleration and braking time )
Speed display: digital display, four numbers display and 4 accurate to ± 1 r/min, measurements per minute
Selection function: print result with printer (optional)
Characteristics:
Automatic self-testing after the electricity (can skip),strong interference suppression, automatic measurement when the speed reach preset speed.
Provide special calibration procedure
Digital display and the result can be printed by printer.
Average many measurement results
Position with position device M466 linkage according to an angle
Six ways of support, add or subtract show, polar or component show or both ways to show
Store 100 files of rotor’s data
Show static unbalance and couple unbalance, switching metric and imperial units
Optional configuration:
Serial Printer (RS232)
Loading unit(RS232),automatic driving controller
Position device M466
Two balance machine systems, photoelectric sensors (DC power supply ), benchmark phase generator
ST590 digital measuring instrument
ST590 is specifically for balancing double-planes hard bearing of permanent calibration. It designed as modular to keep the superior performance and improve the stability. The shape is simple and the operation is easy. In the manufacturing process, using a large number of high quality components and materials to ensure that the overall quality of machine. This measuring unit is wide application and it features good performance, long service life, working with low environmental requirements and most users can meet the needs of production.
Applying to permanent calibration hardware supports double-sided balancing machines. It process measured data when it’s measuring. It particularly suitable for semi-automatic balancing system.
For more information, please feel free to contact us.