Tel195 2621 8985021-3102 9308

Shanghai schiak testing machinery Corp., Ltd.

Email: 66630177@163.com

Mobile: +86 195 2621 8985

Fax: +86 021-3102 9308

Address: No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai


Products
Location:Home > Products
ard Bearing Dynamic Balancing Machine HY1/10BK

Type of machine

HY1BK

HY10BK

Max. mass of rotor

10kg

16kg

Max. diameter of rotor

Φ360mm

Φ360mm

Distance between two bearing supports of rotor journal

36~450mm

36~450mm

Journal diameter of rotor

Standard

Φ5~Φ22mm

Φ6~Φ30mm

Extensional (optional)

Φ22~Φ50mm

Φ30~Φ70mm

Diameter ranger in the driving position of belt

Φ10~Φ150mm

Φ10~Φ150mm

Balancing speed

(when the rotor with the diameter of Φ100mm)

0~1650r/min

0~1650r/min

Motor rating

0.2/0.37kW

0.2/0.37kW

Max. indication sensitivity

(balancing speed>820r/min)

590

0.15g.mm

0.3g.mm

690

0.05g.mm

0.1g.mm

Machine bed length

Standard

500 mm

500 mm

Optional

950 mm

950 mm

*ST590/ST630 starts measure at 180r/min; ST690 starts measure at 120r/min

Hard Bearing Dynamic Balancing Machine HY1/10BK
HY1/10BK hard bearing balancing machine is one of the advanced universal horizontal balancing machines, a compact product of precision mechanism and electric technology . Features such as easy operation, stabile performance and high test precision are suitable for fields of motor, blower, water pump, printing machine, paper machine, textile machine, diesel engine, electronic component, tooling machine, aero plane and etc.
This machine is especially suitable to balance the rotors in micro- & small- motor, supercharge and micro-auto air-conditioner. The belt-driving mode controlled by a DC speed controller for step less speed controlling features high precision, high efficiency, simple operation, legible indication and powerful man-to-machine dialogue. The combination of belt-driving mode and m DC motor achieves high precision, high efficiency, simple operation, legible indication and powerful man-to-machine dialogue. When the machine starts up, an adjustment can be done only according to distance between two correction planes and bearing supports, as well as radius of correction planes of rotors, unbalance and phase or rotor will be correctly displayed after a single running.

  • Integral H-type pedestal with light dead weight, small vibration damping and high stiffness.

  • Kit components purchased from the internal or external famous companies, such as rolling bearing, low-voltage elements.

  • Quality supporting system of strict quality system, complete technology, inspecting and tooling machines.

  • Optimized production configuration caused by the multiform option.